Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VICTREX® PEEK 450FE20 - (PEEK+PTFE) - Victrex plc

Material Data Center offers the following functions for VICTREX® PEEK 450FE20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Victrex PEEK datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 1.2 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.7 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3200 MPa ISO 527
Carico unitario a trazione 78 MPa ISO 527
Deformazione a rottura 25 % ISO 527
Modulo a flessione, 23°C 3200 MPa ISO 178
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 6 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C N kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C 8 kJ/m² ISO 180/1A
Durezza Shore D 81 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 343 °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 143 °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 150 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 40 E-6/K ISO 11359-1/-2
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Fattore di dissipazione, 1MHz 40 E-4 IEC 62631-2-1
Resistività volumica 1E14 Ohm*m IEC 62631-3-1
Rigidità dielettrica 26 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 150 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1400 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 - 150 °C -
Pre-essiccamento - Tempo 3 - 5 h -
Umidità del Processo ≤0.02 % -
Temperatura dello stampo 170 - 200 °C -
Temperatura - Zona di Alimentazione ≤100 °C -
Zona 1 355 °C -
Zona 2 360 °C -
Zona 3 365 °C -
Zona 4 370 °C -
Temperatura dell ugello 375 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Pellet, Colore naturale
Caratteristiche
Grado tribologico
Resistenza Chimica
Resistenza chimica generale
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.